Vinotemp VT122TS2Z Bedienungshandbuch PDF herunterladen (Seite 11)

1 7 6 2 1 S o u t h S u s a n a R o a d , R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1

i n f o @ v i n o t e m p . c o m

STORING WINE

You can place 44 standard bottles in the upper zone and 66 standard

bottles in the lower zone with 11 bottles on each shelf and 11 bottles in

bulk storage at the bottom. Approximate wine cooler capacity is 110

bottles.

Note: Bottle capacities are approximate maximums when storing

traditional Bordeaux 750 ML bottles and may include bulk storage. Many

bottles differ in size and dimensions. As such, the actual number of

bottles you may be able to store may vary.

SHELVES

To avoid damaging the door gasket, ensure that the door is fully opened when pulling the shelves out of

the rail compartment.

The slide-out shelves allow bottles of wine to be

viewed and removed more easily. Any of the

shelves can be removed to store larger bottles.

For easy access to the bottles, you must pull the

shelf approximately ⅓ of the way out of the rail

compartment; however, this unit was designed

with a plastic post on each side of the shelf track

to prevent bottles from falling.

When removing a shelf from the inner cabinet,

make sure to remove all items first. Then move the

shelf to the position where the notch of the shelf is

exactly under the plastic post and lift the shelf

directly up. In order to replace the shelf, repeat the

steps described above in reverse.

DEFROSTING

The wine cooler defrosts automatically. The evaporator behind the rear wall of the unit automatically

defrosts and the condensation collects in the drainage channel behind the rear wall of the unit, flowing

through the drainage hole into the drip tray by the compressor, where it evaporates.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Keine Kommentare

Vinotemp VT122TS2Z Bedienungshandbuch Seite 11