Vinotemp WINE-MATE VINO-2500SSW Spezifikationen

wwwwww..wwiinneemmaattee..ccoomm Wall Split Cooling System Installation, Operation & Care Manual VINO-1500SSW VINO-2500SSW wwwwww..vviinnoo

- 9 -Care Guide In general, always unplug system or disconnect powe

- 10 -User’s Troubleshooting This Troubleshooting Chart is not prepar

- 11 -high or not cooling and running continually b. Cellar too lar

- 12 -fan running but condensing unit not running b. Failed components

- 13 -Installer’s Instruction Federal law requires that WINE-MATE spl

- 14 -CAUTION: Liquid and suction line locations may differ from what

- 15 -CAUTION: Low ambient condition kit is required if the installati

- 16 -3. Condensing Unit Installation CAUTION: If the condensing un

- 17 -3 – Liquid Line or Suction Line; 4 - Pressure Control Back Posit

- 18 - Fig. 10 Condenser Fan Cycle Control 6. Piping and Evacuating

- 1 -Important Safety Information WARNING: • Do not use a ground fau

- 19 -Model No Line Set Liquid Line Suction Line Drain Line Recommend

- 20 -6) Again, you must verify if the superheat at the evaporator un

- 21 -9) Low suction pressure and low head pressure Normal to high su

- 22 -Cellar Construction This is only a guide and shall be considere

- 23 -Electrical Wiring Diagrams CAUTION: • Hidden lines are the fi

- 24 - Fig. 14 Low Ambient Temperature VINO-1500~2500SSW-LA Electric

- 25 -Customer Support If you need further assistance, please contact

- 26 -Warranty Thank you for choosing a Vinotemp cooling unit. Ple

- 27 -VINOTEMP will, at its discretion, repair or replace the unit and

- 2 -Table of Contents Features & Specifications…………………….….………….

- 3 -Features and Specifications • Wine-Mate wall split cooling syst

- 4 -NOTE: To prepare rough-in, leave minimum 3” clearances for electr

- 5 -Temperature and Humidity 1. Use of the controller Fig. 2 Tempe

- 6 -4) Alarm Signals The alarm codes are described as follows. MES

- 7 -5. How to calibrate the air temperature probe If the actual cel

- 8 -4) Press the “SET” key to display its value. 5) Use up/down keys