Vinotemp WINE-MATE VINO8500DS Bedienungshandbuch

WINE-MATE Ducted System Installation, Operation & Care Manual VINO4500DS VINO6500DS VINO8500DS VViinnootteemmpp IInntteerrnnaatt

- 9 -Dip-switch description (See detail in VSTAT instruction) 1, 2 di

- 10 -If the function is enabled, the compressor is not energized for

- 11 - 2) Alarm Signals 2.1 Code Description 2.2 Alarm Recovery P

- 12 -2. The value of the set point will be displayed and the “°C” or

- 13 -Service Guide 1. Refrigeration Piping and Charge • The subc

- 14 -k. Low suction pressure and low to normal head pressure H

- 15 -4. Electrical Wiring Fig. 4.2 VINO4500DS Electrical Wiring Diag

- 16 - Fig. 4.4 VINO6500DS Electrical Wiring Diagram (VTSTAT) Fig. 4.

- 17 - Fig. 4.6 VINO8500DS Electrical Wiring Diagram (VTSTAT, UJ6220Z)

- 18 -5. Use of the adjustable low pressure control (if applicable)

- 1 -READ AND SAVE THESE INSTRUCTIONS TABLE OF CONTENTS Important

- 19 -Care Guide In general, always unplug system or disconnect po

- 20 -User’s Troubleshooting This Troubleshooting Chart is not prepar

- 21 - e. Malfunctioning fans f. Improper evaporator or condenser air

- 22 -Customer Support If you still have problems, please contact us

- 23 -Warranty Thank you for choosing a Vinotemp cooling unit. Ple

- 24 -VINOTEMP will, at its discretion, repair or replace the unit and

- 2 -Important Safety Information • DO NOT USE A GROUND FAULT I

- 3 -Feature Description • WINE-MATE ducted system VINO4500-8500DS

- 4 -The dimensions and capacities are specified as follows: MODEL D

- 5 -Cellar Construction This is only a guide and shall be considered

- 6 -Installer’s Instruction Federal law requires that WINE-MATE duct

- 7 -1. Location • Place the unit in a properly ventilated location.

- 8 -Temperature Control & Humidity Adjustment 1. Temperature Se