Vinotemp 100 Betriebsanleitung PDF herunterladen (Seite 10)

W W W . V I N O T E M P . C O M

DOWN

Used to lower (cool) the set temperature by 1°C or 1ºF.

ºF/ºC Selector

Select the temperature display setting in Fahrenheit or Celsius degree. To change the temperature

from Fahrenheit to Celsius or from Celsius to Fahrenheit, touch and hold key for 5 seconds.

KEY LOCK

If in 2 minutes without touching any key, the controls will be locked automatically. To release the lock,

touch the and marks at the same time for at least 5 seconds.

SETTING A TEMPERATURE

The interior control range is 40°- 65°F

The temperature will increase by 1°C or 1ºF if you touch UP once, or the temperature will

decrease by 1°C or 1ºF if you touch DOWN once.

To view the set temperature at any time, touch UP or DOWN and the set temperature will

temporarily flash in the LED display for 5 seconds.

NOTE: When using the unit for the first time or after a long period of inactivity, there may be a

variance of a few degrees between the selected temperature and the temperature indicated on the

LED readout. This is normal due to the length of inactivity, and will correct itself after the unit is run for

a few hours. If the unit is unplugged, has lost power or is turned off, wait 3 to 5 minutes before

restarting the unit. The unit will not restart before this time delay.

DYNAMIC COOLING/SILENT MODES

The Dynamic Cooling feature enables the relative humidity inside the unit and the temperature to be

distributed evenly around the interior so you can store all of your beverages under the exact same

excellent conditions. If you would like to use the unit to store beverages long term, the dynamic

cooling is a must. This will create a continuous climate in the cabinet which imitates that of a wine

cellar.

In the Dynamic cooling mode, the interior fan circulates the inside air evenly until the set temperature

is reached. Dynamic Cooling is the factory preset mode. To change to Silent mode, touch and hold

the UP button for approximately five seconds. The beverage cooler will beep three times to confirm

silent mode is on. To change back to Dynamic Cooling mode, touch and hold the DOWN button for

five seconds. The beverage cooler will beep five times to confirm Dynamic Cooling mode is on.

STORING BEVERAGES

While beverage bottles may vary in size and dimension, approximately 120 12 oz. cans can be stored

in your beverage cooler.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Keine Kommentare

Vinotemp 100 Betriebsanleitung Seite 10