12
WWW.VINOTEMP.COM
PROBLEMS WITH YOUR APPLIANCE
Most common problems can be solved easily, saving you the cost of a possible service
call. Try the following suggestions to see if you can solve the problem before
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE
The unit does not operate
• Ensure unit is plugged in to electrical outlet.
• Check if unit is turned off.
• Check for a tripped circuit breaker or blown fuse.
The unit is not cold
enough
• Check the temperature control setting.
• External environment or ambient temperature may require a
higher setting.
• Check if door does not close completely or is open too often.
• Check if door gasket does not seal properly.
The unit turns on and off
frequently
• The room temperature may be hotter than normal.
• Check if door does not close completely or is open too often.
• Check if door gasket does not seal properly.
• The temperature control is not set correctly.
The unit light does not
work
• Ensure unit is properly plugged in.
• Check for a tripped circuit breaker or blown fuse.
• Check if the light switch is OFF.
The unit makes too much
noise or vibrates
• Check to ensure the unit is level.
• The rattling noise may come from the flow of refrigerant.
This is normal.
• As each cycle ends, you may hear gurgling sounds caused
by the flow of refrigerant in the unit. This is normal.
• Contraction and expansion of the inside walls may cause
popping and crackling noises.
The unit door will not
close properly
• Check to ensure the unit is level.
• The door was reversed and was not properly installed.
• The gasket is dirty.
• The shelves are out of position.
Display shows “EL” or
“EH”
• The air temperature sensor has failed.
Kommentare zu diesen Handbüchern